How to replace the electrical innerpart of the Edison the Mini?

NOTE: Parts only suitable for Edison the Mini from batch number 2003210 and newer.

1. Place the product upside down.
2. Loosen the three screws.
3. Open the product by gently pulling on one of the three rubber feet.
4. Remove the old base and lampshade.
5. Replace the old base with the new one.
6. Make sure the parts fit together properly while reassembling the product.
7. Place the new base back into the lamp. Make sure the screws are properly tapped.
8. Screw the base back in, but not too tightly.
9. You can use the product again. The battery must be charged to function properly.

In the video below, you can watch the above instructions: